Powerflex Volkswagen Passat CC 35 (2008-2012) Poly Bushes. The special type of polyurethane Powerflex use is an advanced material which has unique properties. Their products have the ability to offer high performance without vibration or noise but with exceptionally long life.
In addition to their "standard" range of bushes, which they publish, they also manufacture many special components for original equipment car companies and also industrial applications.
Because of their manufacturing facility and wide experience with suspension components Powerflex can design and manufacture very quickly bushes and other parts, especially for your Volkswagen Passat CC 35 (2008-2012).
Notes
PFF85-504 fits vehicles upto the middle of 2008, please check the picture of the 2 bushes in order to identify the insert you require.
PFF85-704 fits vehicles from the middle of 2008 on, please check the picture of the 2 bushes in order to identify the insert you require.
This bush is suitable for Road and Black Series applications. It is the same part as the Black Series but with Road Series packaging. Fits into 1K0505311AB wishbone. ..
This bush is suitable for Road and Black Series applications. It is...
This bush is suitable for Road and Black Series applications. It is the same part as the Black Series but with Road Series packaging. Fits into 1K0505311AB wishbone. ..
This bush is suitable for Road and Black Series applications. It is...
This polyurethane bush fits into the rear position of the front arm and provides anti-lift properties and 1 of caster offset. It is designed to complement PFF85-501G that fits into the front position ..
This polyurethane bush fits into the rear position of the front arm...
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting ..
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung...
PFF3-905 Lower Engine Mount Small Bush is a replacement for the often softened and perished, rubber bush in the original 'dog bone' shaped bracket, helping to restrict engine movement and improve gear..
PFF3-905 Lower Engine Mount Small Bush is a replacement for the oft...
Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy al..
Available singularly to suit a specific vehicle or as a handy 4-pie...
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting ..
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung...
This bush fits 4 wheel drive models only where the differential casing measures 30mm in width. The 30mm Differential casing mount is found on AWD 2004-2015 PQ35 platform vehicles. The OEM rubber mount..
This bush fits 4 wheel drive models only where the differential cas...