Powerflex Volkswagen Jetta Mk5 1K (2005-2010) Poly Bushes. The special type of polyurethane Powerflex use is an advanced material which has unique properties. Their products have the ability to offer high performance without vibration or noise but with exceptionally long life.
In addition to their "standard" range of bushes, which they publish, they also manufacture many special components for original equipment car companies and also industrial applications.
Because of their manufacturing facility and wide experience with suspension components Powerflex can design and manufacture very quickly bushes and other parts, especially for your Volkswagen Jetta Mk5 1K (2005-2010).
Notes
PFF85-501G is on-car camber adjustable offering +/-0.5° of adjustment, for a non adjustable bush use PFF85-501.
PFF85-502G
gives 1° of additional caster angle and anti lift properties, the bush
is supplied pre fitted into the new bracket, for a bush without geometry
adjustment use PFF85-502.
PFF85-504 fits vehicles upto the
middle of 2008, please check the picture of the 2 bushes in order to
identify the insert you require.
PFF85-704 fits vehicles from
the middle of 2008 on, please check the picture of the 2 bushes in order
to identify the insert you require.
PFF85-531 is an insert designed to fill the voids of the original bush. This
mount is found various 2.0 FSi, 2.0 TFSi, 2.0 GTi, 2.0 Turbo & V6
3.2 & 3.6 engines. Please check voids of your original mount are the
same as the image shown for correct fitment.
This bush is suitable for Road and Black Series applications. It is the same part as the Black Series but with Road Series packaging. Fits into 1K0505311AB wishbone. ..
This bush is suitable for Road and Black Series applications. It is...
This bush is suitable for Road and Black Series applications. It is the same part as the Black Series but with Road Series packaging. Fits into 1K0505311AB wishbone. ..
This bush is suitable for Road and Black Series applications. It is...
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting ..
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung...
Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy al..
Available singularly to suit a specific vehicle or as a handy 4-pie...
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting ..
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung...
PFF85-530 is an insert and designed to fill the voiding in the original mount. The stock transmission and upper engine mounts have always been a problem on these vehicles. The rubber perishes and spli..
PFF85-530 is an insert and designed to fill the voiding in the orig...