Powerflex Volkswagen Tiguan MK1 (2007 - 2017) Poly Bushes. The special type of polyurethane Powerflex use is an advanced material which has unique properties. Their products have the ability to offer high performance without vibration or noise but with exceptionally long life.
In addition to their "standard" range of bushes, which they publish, they also manufacture many special components for original equipment car companies and also industrial applications.
Because of their manufacturing facility and wide experience with suspension components Powerflex can design and manufacture very quickly bushes and other parts, especially for your Volkswagen Tiguan 5N (2007-).
Notes
PFF85-501G is on-car camber adjustable offering +/-0.5° of adjustment, for a non adjustable bush use PFF85-501.
PFF85-502G
gives 1° of additional caster angle and anti lift properties, the bush
is supplied pre fitted into the new bracket, for a bush without geometry
adjustment use PFF85-502.
PFF85-504 fits vehicles upto the
middle of 2008, please check the picture of the 2 bushes in order to
identify the insert you require.
PFF85-704 fits vehicles from
the middle of 2008 on, please check the picture of the 2 bushes in order
to identify the insert you require.
PFR85-524 & PFR85-525 fit 4 wheel drive models only.
PFR85-527 & PFR85-528 fit 4 wheel drive models only up to 28.5.2012.
This bush is suitable for Road and Black Series applications. It is the same part as the Black Series but with Road Series packaging. Fits into 1K0505311AB wishbone. ..
This bush is suitable for Road and Black Series applications. It is...
This bush is suitable for Road and Black Series applications. It is the same part as the Black Series but with Road Series packaging. Fits into 1K0505311AB wishbone. ..
This bush is suitable for Road and Black Series applications. It is...
This polyurethane bush fits into the rear position of the front arm and provides anti-lift properties and 1 of caster offset. It is designed to complement PFF85-501G that fits into the front position ..
This polyurethane bush fits into the rear position of the front arm...
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting ..
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung...
PFF3-905 Lower Engine Mount Small Bush is a replacement for the often softened and perished, rubber bush in the original 'dog bone' shaped bracket, helping to restrict engine movement and improve gear..
PFF3-905 Lower Engine Mount Small Bush is a replacement for the oft...