Powerflex Poly Bushes for Audi A3 Mk1 Typ 8L. The special type of polyurethane Powerflex use is an advanced material which has unique properties. Their products have the ability to offer high performance without vibration or noise but with exceptionally long life.
In addition to their "standard" range of bushes, which they publish, they also manufacture many special components for original equipment car companies and also industrial applications.
Because of their manufacturing facility and wide experience with suspension components Powerflex can design and manufacture very quickly bushes and other parts, especially for your Audi A3 Mk1 Typ 8L.
Notes
For pressed steel front wishbones use PFF85-201 & PFF85-410
For cast wishbones use PFF85-201 or PFF3-501 & PFF3-610. On cast wishbones the later cars have a larger 45mm bush, in this case please use PFF3-501. For earlier cars with a 30mm bush please use PFF85-201.
PFF85-414 Is for Race use and is a rose joint type bush, it fits both pressed steel and cast wishbones
This part replaces OE number: 1J0412331C and has been designed to give an extra 10mm of lowering when fitted as it allows the strut to sit higher into the body of the top mount. These new top mounts s..
This part replaces OE number: 1J0412331C and has been designed to g...
This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For the small..
This bush features a CNC machined Stainless Steel sleeve with an of...
PFF85-201G gives +/- 0.5 degrees of camber adjustment. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giv..
PFF85-201G gives +/- 0.5 degrees of camber adjustment. PFF85-201G ...
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting ..
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung...
Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy al..
Available singularly to suit a specific vehicle or as a handy 4-pie...
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting ..
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung...
This part replaces OE number: 1J0501541B,C & D, 6R0501541A, B & C. Fits 2WD models only with a 69mm diameter bore rear beam. For vehicles with 72.5mm bore please use PFR85-415. ..
This part replaces OE number: 1J0501541B,C & D, 6R0501541A, B & C. ...