Powerflex Poly Bushes for Audi Q2 2WD REAR BEAM. The special type of polyurethane Powerflex use is an advanced material which has unique properties. Their products have the ability to offer high performance without vibration or noise but with exceptionally long life.
In addition to their 'standard' range of bushes, which they publish, they also manufacture many special components for original equipment car companies and also industrial applications.
Because of their manufacturing facility and wide experience with suspension components Powerflex can design and manufacture very quickly bushes and other parts, especially for your Audi Q2 2WD REAR BEAM
Note: Check roll bar mounting bush design and size
This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. It is designe..
This bush features a CNC machined Stainless Steel sleeve with an of...
PFF85-831 replaces the lower half of the original bush OEM part number 5Q0198 037 A and includes an insert to fit into and fill the voids in the upper bush. This unique bush has been designed to be fi..
PFF85-831 replaces the lower half of the original bush OEM part num...
PFF85-833 replaces the lower half of the original bush OEM part number 5Q0198 037 B and includes an insert to fit into and fill the voids in the upper bush. This unique bush has been designed to be fi..
PFF85-833 replaces the lower half of the original bush OEM part num...
PFF3-902G - Front Wishbone Rear Bush with Caster Adjustable features. This part uses our Black Series 95 durometer material rotating ball, with our Purple 80 durometer inner cups - recommended for roa..
PFF3-902G - Front Wishbone Rear Bush with Caster Adjustable feature...
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting ..
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung...
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits ..
Made using our Black 95A Durometer Material to increase stiffness o...
PFF3-1321 Lower Torque Mount Small Bush is supplied with an outer shell and made using our stiffest Black 95A durometer material, increasing stiffness over the OE rubber bush by 40% ..
PFF3-1321 Lower Torque Mount Small Bush is supplied with an outer s...
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits ..
Made using our Black 95A Durometer Material to increase stiffness o...
Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy al..
Available singularly to suit a specific vehicle or as a handy 4-pie...